The Triotrac M is our compact self-propelled feed mixer with a single vertical auger. The feed is loaded into the loading rotor using a cutting/loading system, where it is simultaneously transported to the mixing tub. The compact self-propelled feed mixer is extremely agile, making it suitable for low buildings in cramped yards.
COMPACT AND AGILE
A small turning circle paired with four-wheel steering makes the Triotrac M especially easy to manoeuvre between buildings and within silage pits. The unique loading system with rotor and loading platform ensures that the feed is processed cleanly and without losing any during the loading process. Any loose feed in front of the silage pit is simple to scoop up. This is beneficial both inside the silage pit and in front of it, especially in combination with the unique cutting system (which leaves a neat cutting surface). The Triotrac M can also process round or square bales, loose by-products, mineral feed and even fodder beet or potatoes with ease. The Triotrac M can extract silage at heights of up to 4.5 metres.
The spacious cabin’s height can be adjusted to ensure it is always optimal. The joystick in the armrest is used to control the machine. All settings for loading, mixing and discharging the feed can be adjusted with the joystick. For the Triotrac M, the diesel engine is located at the rear of the machine, ensuring it is easily accessible (e.g. for maintenance). Another benefit is that the sound of the engine can barely be heard from the cabin.
The Triotrac M can be fitted with a cross conveyor belt at the rear (AL) or discharge doors on both sides (ZK). A cross conveyor chain and an extension chain are also available to order for the AL machine. The discharge doors have rounded corners and are extra wide so that the feed flows through them smoothly and is distributed evenly. The rounded discharge opening ensures the discharge doors close perfectly. The Triotrac M is available with a capacity of 14 and 17 m3.